Water Power Fire Control Co.,Ltd

Product Installation Precautions

Notes on installation and maintenance of heptafluoropropane gas fire extinguishing device

1, the system installation is completed, should be in accordance with the design content and requirements, according to the relevant national standards for inspection, testing and debugging, and after acceptance before delivery.

View Details>

Foam gun installation and maintenance matters needing attention

1. The foam gun must remain intact. After each use, check whether the parts are complete, whether the connection is tight, and whether the rubber at the suction pipe and pipe joint is intact.

View Details>

Precautions for Installation and Maintenance of Semi-fixed Foam Fire Extinguishing Device

1. After the equipment is used, the user must purchase the same type of foam extinguishing liquid for supplementary filling. During filling, plastic pipe can be used for suction or funnel can be used for injection from the liquid filling port. After filling, tighten the lid of the liquid filling port to prevent foam liquid from splashing when the equipment moves.

View Details>

Foam generator installation and maintenance precautions

1. After each use, the foam generator should be flushed and inspected, and damaged parts should be replaced in time.

View Details>

Installation and maintenance of closed foam/water spray device

1, maintenance personnel should be professionally trained and familiar with the foam-water spray device and the whole system principle, performance and operation, maintenance, maintenance requirements.

View Details>

Pressure proportional mixing device installation and maintenance precautions

1. Before use, check whether the flange cover on the filling pipe and the flange of the connecting pipe are sealed and whether various valves are closed.

View Details>

Precautions for installation and maintenance of fire hose

1. When the fire hose is put on the fire hose interface, it must be carefully screwed in and then tied firmly.

View Details>

Fire gun buckle installation and maintenance precautions

1. Regularly check whether the gun body is corroded and whether the dense ring is aging. If so, replace it in time.

View Details>

Sprinkler installation and maintenance precautions

1, the nozzle installation should be used to match the special hand.

View Details>

Fire hose reel installation and maintenance precautions

1. Check once every six months. If there are obstacles in the rotating part, add lubricating oil to the rotating part after cleaning. If major faults are found, they should be repaired in time.

View Details>

< 12 >